Welcome Guest! To enable all features please try to register or login.
bed sex measurements
Options View
Previous Topic Next Topic
theDungeonArcher
#1 Posted : Wednesday, December 17, 2014 12:08:05 AM(UTC)

Rank: Novice Forum Member

Joined: 12/14/2014(UTC)
Posts: 23
tell me pleaseBoo hoo!
Back to top
RandyKnight
#2 Posted : Wednesday, December 17, 2014 7:29:30 AM(UTC)


Rank: Seasoned Forum Member

Joined: 6/5/2013(UTC)
Posts: 1,059
Location: Dallas
I use a "Wooden Bed" prop as it is very forgiving without any size change at any level off the floor.
No need for offsets....just put it inside the view-able bed and make invisible.

The key is to but the top at the level of your view-able bed and to the side where the sex-play starts.

I sure there are other ways but this is just too easy...
Back to top
2 users thanked RandyKnight for this useful post.
LazTopCat on 12/17/2014(UTC), theDungeonArcher on 12/21/2014(UTC)
Justintime_JKD
#3 Posted : Thursday, December 18, 2014 5:50:53 AM(UTC)

Rank: Novice Forum Member

Joined: 7/10/2012(UTC)
Posts: 8
Medals:
We make them just as Randy said but with a "Modern bed 1" (invisible), has always worked 1st time every time.

Thanks Randy, gonna to try the wooden bed for fun on our next build.

Justintime_JKD (Just-a-Katt Deco)
Back to top
2 users thanked Justintime_JKD for this useful post.
RandyKnight on 12/19/2014(UTC), theDungeonArcher on 12/21/2014(UTC)
Czarcasm
#4 Posted : Thursday, December 18, 2014 7:08:03 AM(UTC)


Rank: Seasoned Forum Member

Joined: 7/3/2011(UTC)
Posts: 955
The object you apply the sex script to, doesnt even have to be a bed prop. You can use cubes , spheres...anything. the sex script will always begin at the same height from your "floor" and centred on your object.
Its going to be invisible anyway, so use whatever you want, then just line it up with the visible "bed" you use.

Signature Rotation Powered By rotasig
Want a cool forum sig? Contact me for details.
Back to top
 |  Edit by user
2 users thanked Czarcasm for this useful post.
Anhton_Novo on 12/18/2014(UTC), theDungeonArcher on 12/21/2014(UTC)
Xaoz
#5 Posted : Thursday, December 18, 2014 10:21:51 AM(UTC)


Rank: Veteran Forum Member

Joined: 2/15/2008(UTC)
Posts: 9,268
Location: Texas
Medals:
ok, I must be a little weird, because I actually take the time to adjust them. There are no set numbers that you can use to get them just right, it's something you just need to play with because each bed is just a little different, the easiest way is to use a bot and yourself to do the alignment, unless you have a very patient partner that is willing to keep jumping in and out of bed with you. Whistle


Please Shop responsibly and try before you buy
Back to top
4 users thanked Xaoz for this useful post.
Pryss_2 on 12/18/2014(UTC), Loving_INTENSE on 12/18/2014(UTC), Anhton_Novo on 12/18/2014(UTC), theDungeonArcher on 12/21/2014(UTC)
Pryss_2
#6 Posted : Thursday, December 18, 2014 11:10:03 AM(UTC)


Rank: Veteran Forum Member

Joined: 2/22/2008(UTC)
Posts: 2,877
Not weird X. I do the same thing.
Back to top
2 users thanked Pryss_2 for this useful post.
Loving_INTENSE on 12/18/2014(UTC), theDungeonArcher on 12/21/2014(UTC)
Czarcasm
#7 Posted : Thursday, December 18, 2014 1:17:48 PM(UTC)


Rank: Seasoned Forum Member

Joined: 7/3/2011(UTC)
Posts: 955
Originally Posted by: Xaoz Go to Quoted Post
ok, I must be a little weird, because I actually take the time to adjust them. There are no set numbers that you can use to get them just right, it's something you just need to play with because each bed is just a little different, the easiest way is to use a bot and yourself to do the alignment, unless you have a very patient partner that is willing to keep jumping in and out of bed with you. Whistle



What i was getting at was, if you use a cube for example. you dont need to play with offsets. Just move the entire cube to one side or the other so the animations line up with the bed thats visible.

Much , much faster than the offsets method.

Signature Rotation Powered By rotasig
Want a cool forum sig? Contact me for details.
Back to top
 |  Edit by user
2 users thanked Czarcasm for this useful post.
PixelJim on 12/18/2014(UTC), theDungeonArcher on 12/21/2014(UTC)
Xaoz
#8 Posted : Thursday, December 18, 2014 3:36:54 PM(UTC)


Rank: Veteran Forum Member

Joined: 2/15/2008(UTC)
Posts: 9,268
Location: Texas
Medals:
Originally Posted by: Czarcasm Go to Quoted Post
Originally Posted by: Xaoz Go to Quoted Post
ok, I must be a little weird, because I actually take the time to adjust them. There are no set numbers that you can use to get them just right, it's something you just need to play with because each bed is just a little different, the easiest way is to use a bot and yourself to do the alignment, unless you have a very patient partner that is willing to keep jumping in and out of bed with you. Whistle



What i was getting at was, if you use a cube for example. you dont need to play with offsets. Just move the entire cube to one side or the other so the animations line up with the bed thats visible.

Much , much faster than the offsets method.


I understand that completely, but I tend to be a bit miserly when it comes to using two props to do one job.


Please Shop responsibly and try before you buy
Back to top
2 users thanked Xaoz for this useful post.
Czarcasm on 12/18/2014(UTC), theDungeonArcher on 12/21/2014(UTC)
elmerfudddaffy
#9 Posted : Thursday, December 18, 2014 7:33:41 PM(UTC)


Rank: Seasoned Forum Member

Joined: 11/20/2013(UTC)
Posts: 760
Medals:
I do the same xaoz but for me I'm still learning deco and am still learning to deal with the maps so I use 2 props sometimes


vww://utherverse.vww/@129967/@829894
Back to top
1 user thanked elmerfudddaffy for this useful post.
theDungeonArcher on 12/21/2014(UTC)
RandyKnight
#10 Posted : Friday, December 19, 2014 7:54:45 AM(UTC)


Rank: Seasoned Forum Member

Joined: 6/5/2013(UTC)
Posts: 1,059
Location: Dallas
Originally Posted by: Justintime_JKD Go to Quoted Post
We make them just as Randy said but with a "Modern bed 1" (invisible), has always worked 1st time every time.

Thanks Randy, gonna to try the wooden bed for fun on our next build.

Justintime_JKD (Just-a-Katt Deco)



The other day I used the wooden bed upside down about 700 clicks above the floor to see if I could have sex
upside down.....ended up having sex on top of where the bed was....

Next i want to try it sideways 90% rotation on a wall...
Back to top
1 user thanked RandyKnight for this useful post.
theDungeonArcher on 12/21/2014(UTC)
Xaoz
#11 Posted : Friday, December 19, 2014 8:07:34 AM(UTC)


Rank: Veteran Forum Member

Joined: 2/15/2008(UTC)
Posts: 9,268
Location: Texas
Medals:
I'm fairly certain that the rotation won't make difference, as I believe that the sex animation orients 'up' by the property default and not the object it is placed on.

What I suspect will happen is that you will end up inside the bed based on it's rotational center point.

By all means though try it out, and let me know if my theory is correct.

Which gives me an idea on how to determine the number of clicks you would need to go up or down on any given bed. I'll do some experimenting later tonight and let you know if it works the way I think it will.


Please Shop responsibly and try before you buy
Back to top
 |  Edit by user
2 users thanked Xaoz for this useful post.
RandyKnight on 12/19/2014(UTC), theDungeonArcher on 12/21/2014(UTC)
Czarcasm
#12 Posted : Friday, December 19, 2014 8:16:11 AM(UTC)


Rank: Seasoned Forum Member

Joined: 7/3/2011(UTC)
Posts: 955
Curio should be interesting. If you remember the chairs in trans that showed you sat based on the orientation of the chair and not the floor.

Hopefully the same will be true of the sex scripts.

Signature Rotation Powered By rotasig
Want a cool forum sig? Contact me for details.
Back to top
1 user thanked Czarcasm for this useful post.
theDungeonArcher on 12/21/2014(UTC)
RandyKnight
#13 Posted : Friday, December 19, 2014 8:23:30 AM(UTC)


Rank: Seasoned Forum Member

Joined: 6/5/2013(UTC)
Posts: 1,059
Location: Dallas
Originally Posted by: Czarcasm Go to Quoted Post
Curio should be interesting. If you remember the chairs in trans that showed you sat based on the orientation of the chair and not the floor.

Hopefully the same will be true of the sex scripts.



WOW so that is why those chairs where sideways....never tried them there...
just thought they looked silly....now I am the dumb one ....again..Undecided
Back to top
1 user thanked RandyKnight for this useful post.
theDungeonArcher on 12/21/2014(UTC)
Users browsing this topic
Guest (7)
Forum Jump  
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.

Clean Slate theme by Jaben Cargman (Tiny Gecko)
Powered by YAF | YAF © 2003-2010, Yet Another Forum.NET
This page was generated in 0.325 seconds.
TC-IIS-7
18.216.77.153